The new MDM50 portable hygrometer from Michell Instruments provides fast dew point measurements for compressed air - the T95 from saturation to -35°C pressure dew point is typically <5 minutes. Its design allows extremely fast and easy spot measurements of the dew point in air and gases. At the heart of the MDM50 is a new generation of polymer sensor elements that have been trimmed for long-term stability and resistance to many chemicals. This makes the MDM50 especially suitable for use in industrial applications where heavy contamination can be a problem. In addition to the robust sensor and integrated particle filter, the housing complies with NEMA 6 (IP68) protection when the cover is closed. A complete sampling system with filtration and flow control is already integrated for easy operation. Connect sample gas via the quick coupling or SwagelokTM fitting and switch on, ready! The MDM50 displays the dew point value under system pressure or atmospheric within a very short time, simply and always reliably. The MD50 is as practical as it is easy to use, as it has been optimized for the measuring range from -50 to +20°C dew point (display range -60/+60°C dew point). With a weight of only 4 kg, it is robust and yet fully portable. The long operating time of 16 hours also enables use in locations where no mains voltage supply is available for long periods. Typical applications include dew point measurement in compressed air dryers, as well as humidity measurement in medical gases, on plastic drying equipment and for quality monitoring of instrument air at various points of use.