Successful monitoring solution HWg STE2 extended by LITE and PLUS version

E-mail alerting to up to five addresses

NEW: SIMPLE LAN/WI-FI TEMPERATURE SENSOR
The STE2 LITE IP thermometer with an RJ11 connector can monitor up to 4 sensor values from external sensors (temperature, relative humidity, CO2, VoC, 4-20 mA and others). In case of limit deviations, an e-mail alert is sent. The STE2 LITE unit package also includes a temperature sensor with 1m cable.

ETHERNET AND WI-FI HYGRO/THERMOMETER
The STE2 R2 monitors up to 5 external 1-Wire and 1-Wire UNI sensors as well as 2 digital inputs and can be connected via LAN or WLAN and operated via power supply or PoE. When limit values are exceeded, alarms are sent via e-mail, SNMP or the online portal Sens-Desk. The easy-to-commission devices are used for temperature, humidity, current/voltage, leakage, smoke, entry, motion monitoring and more.

NEW: INDUSTRIAL SNMP THERMOMETER FOR UP TO 15 SENSORS
The PLUS variant of the popular STE2-R2 is a professional LAN & Wi-Fi product for remote monitoring of industrial sensors with enhanced security through SNMPv3, HTTPS certificates and IPv6. It offers monitoring of up to 15 external sensor values via 2 RJ11 ports and additionally 2 digital inputs. In case of limit deviations, an e-mail alarm or SNMP traps are sent. VDO (Virtual Digital Outputs) can also be used to control external relay outputs depending on the sensor value. The unit is supplied with a 3m RJ11 temperature sensor and can also be powered via PoE.