The new stars of B+B

The new robust temperature, humidity and pressure sensors from B+B Thermo-Technik defy wind and weather and provide precise measurement results for your applications in building technology. Depending on the requirements, the probes are available in four different designs. In the case of the duct sensor, the probe is attached to the evaluation electronics from below, and the probe tube is available in different lengths. The pendulum sensor has a measuring probe that is permanently mounted on the housing by means of a cable. Different cable and sensor tube lengths are also available here. In the case of the outdoor sensor, the measuring sensor is attached horizontally to the evaluation electronics. The design is particularly suitable for wall mounting. In addition, there is a compact design. The B+B design housing does not have a measuring sensor led to the outside and convinces with its simple elegance.

Each of the four designs mentioned is available as a temperature, as a combined temperature and humidity or as a compact temperature, humidity and air pressure sensor. Equipped with output signals such as 0-10 V or 4-20 mA, adjustable measuring ranges and offset, this sensor series meets all common requirements of building services engineering. The digital sensors measure temperature ranges from -40 to +125 °C and humidity from 0 to 100 % RH.
Depending on the requirements, the devices are supplied in plastic or aluminum die-cast housing. Optionally, this series is available with a 1.54" white-paper display. This viewing-angle stable, flicker-free and low-energy display shows the current measured values directly. A high long-term stability as well as a very good measuring accuracy for your application and the exact tailoring to the customer requirements ensure an optimal price-performance ratio.

The sensors are specially developed for the requirements in building automation and are particularly suitable for use in this area due to the latest sensor technology and innovative design.