Draw wire sensor for mobile hydraulics
Item number: MH60 Analog Price on request
Delivery time:Delivery time on request
Draw wire sensors of the mobile hydraulic series MH were specially developed for the area of construction machines and equipment. The sensor can be individually configured depending on the application, in which it is used. Small particles can easily be removed when using the open MH versions. Seawater resistant protective grating provide protection against larger objects. For applications with high safety requirements, thicker stainless-steel wires are available, as well as redundant outputs.
Key-Features:► Cost-effective sensor for construction machinery► Measurement ranges from 1 to 4 m► extreme robust construction► Analog outputs: Potentiometer, 0...5 V, 0...10 V, 4...20 mA, optional redundant► teachable outputs: 0...5 V, 0...10 V, with an additional Open-Collector switching
output► Linearity up to ±0.1 % of full scale► Protection class up to IP69K (suitable for close-range high pressure, high
temperature spray downs)► Temperature range -20...+85 °C (optional -40 °C)
Key-Features:► Cost-effective sensor for construction machinery► Measurement ranges from 1 to 4 m► extreme robust construction► Analog outputs: Potentiometer, 0...5 V, 0...10 V, 4...20 mA, optional redundant► teachable outputs: 0...5 V, 0...10 V, with an additional Open-Collector switching
output► Linearity up to ±0.1 % of full scale► Protection class up to IP69K (suitable for close-range high pressure, high
temperature spray downs)► Temperature range -20...+85 °C (optional -40 °C)
WayCon Positionsmesstechnik GmbH
Mehlbeerenstraße 4
82024 Taufkirchen
Germany
82024 Taufkirchen
Germany
+49 89 67 97 13 0
+49 89 67 97 13 250
Attributes of Draw wire sensor for mobile hydraulics
May differ from supplier data
Basic data
Wire acceleration, max. 10 to 50 m/s²
Movement speed, max. 3 m/s
Accuracy 0.1 to 0.5 %
Max. voltage 30 to 48 V
Wire/tape measuring length/measurement range 0 to 4 m
Sensor type: draw-wire sensor or magnetic-tape sensor Draw-wire sensor
Measuring wire/measuring tape material Stainless steel (plastic coated)
Sensor element Potentiometer
Housing / Design / Mechanical data / Materials
Measuring rope diameter 1 to 2 mm
Housing material Aluminum Plastic
Wire outlet Top Top right bottom left
Design Square profile housing
Wire connection M4 threaded bolt Eyelet Cable clip with swivel Show all Dowel pin on swivel with M6 through hole Dowel pin on swivel with M6 through hole + carabiner ring
Signal inputs/outputs and interfaces
Signal output 0…10 V 0…5 V 4…20 mA Show all 0.5…4.5 V Potentiometer 1 kOhm ±5 V 0…5 V (teachable) 0…10 V (teachable) 5 kOhm 10 kOhm
Process connection
Installation type Holes (2) Baseplate
Electrical data / Signal connections
Electrical connection Cable outlet, axial M12 plug connector
More functions and options
Additional functions/options Improved linearity 0.1 % Improved linearity 0.25 % Reverse polarity protection Show all Short-circuit protection Redundant output signal Corrosion protection Teachable analog output
Customized versions
Customized versions Cable lengths Custom designs
Approvals / Certificates / Performance level / Integrity level
Certificates / approvals / test procedures EMC directive RoHS directive
WayCon Positionsmesstechnik GmbH
Mehlbeerenstraße 4
82024 Taufkirchen
Germany
82024 Taufkirchen
Germany
+49 89 67 97 13 0
+49 89 67 97 13 250