Fast digital strain gauge measurement amplifier with color touch screen and SD card memory
Item number: WGA-900A Price on request
Delivery time:Delivery time on request
The measurement amplifier has a 3.5\" color LCD touch screen. It acquires signals from strain gages and strain gauge based sensors with a sampling rate of 4 kHz and a resolution of 24 bit. The measured values are filtered, scaled and displayed in physical units and are also available on a serial interface at the analog output. Furthermore, it also saves the data on SD card if desired. Five alarm levels are signaled on open-collector alarm outputs.
ZSE Electronic Mess-Systeme & Sensortechnik GmbH
In den Freßäckern 28
74321 Bietigheim-Bissingen
Germany
74321 Bietigheim-Bissingen
Germany
+49 7142 6845
+49 7142 6997
Attributes of Fast digital strain gauge measurement amplifier with color touch screen and SD card memory
May differ from supplier data
Signal inputs/outputs and interfaces
Resolution of the A/D converter 24 bit
Total sampling rate (multiplexer) 4 kHz
Sampling rate per channel (simultaneous) 4 kHz
Resolution of the D/A converter 24 bit
D/A output rate 4 kHz
Switching voltage, max. 30 V
Switching current, max. 20 mA
Interfaces/protocols RS-232 RS-485 BCD
Galvanic isolation (analog outputs) Galvanic isolation of output from measuring circuit and supply
Switching function Open collector
Analog signal output +/- 5V +/- 0.2 V
Housing / Design / Mechanical data / Materials
Housing width 92 to 100 mm
Housing height 92 to 96 mm
Housing depth 135 mm
Basic data
Sensor supply voltage 2 to 10 V
Display area -99,999 to 99,999 °C
Number of channels digital outputs 10
Number of channels digital inputs 9
Number of channels analog outputs (DA) 2
Number of channels analog/fiber optic signal inputs 1
Operating mode (stand-alone/interface) Stand-alone Linked to interface
Design / installation / system structure Switch panel installation
Number of digits of the digital display 5-digit
Measurable quantities Strain gauge (DMS), full bridge
Device-internal calculations/functions Peak values Tolerance bands
Device type pre-selection (digital panel meters, screen recorders, ...) Screen recorders
More functions and options
More functions/options TEDS support Switching mode, parameterizable Control inputs for Zero, hold and reset Show all Alarm outputs for HH, HI, OK, LO and LL SD cards for measurement data and configuration
Electrical data / Signal connections
Signal connection Screw terminals
Approvals / Certificates / Performance level / Integrity level
Approvals/certificates EN61326-1 (Class A) EN61010-1 EN61010-2-030 Show all EN50581
ZSE Electronic Mess-Systeme & Sensortechnik GmbH
In den Freßäckern 28
74321 Bietigheim-Bissingen
Germany
74321 Bietigheim-Bissingen
Germany
+49 7142 6845
+49 7142 6997