Level probe (stainless steel | Modbus RTU)
Item number: DCL 571 Applications Fossil raw materialsEnergy
Price on request
Delivery time:Delivery time on request
The DCL 571 with RS485 interface uses the Modbus RTU communication protocol.The submersible probe was designed for level and gauge measurement in wastewater, sludge or river courses. The mechanical robustness of the flush ceramic membrane facilitates easy disassembly and cleaning of the probe in case of service.
The outer diameter is only 22 mm, for installation or retrofitting in 1\" pipes or in cramped installation conditions.
.
The outer diameter is only 22 mm, for installation or retrofitting in 1\" pipes or in cramped installation conditions.
.
Attributes of Level probe (stainless steel | Modbus RTU)
May differ from supplier data
Basic data
Accuracy (%) 0.1 %
Air pressure measurement range 0 to 10 bar
Additional measurement possibilities Filling level
Measured medium Wastewater Fuels Water Show all Oils
Probe type Immersion probe / level probe
Separating diaphragm/diaphragm material Ceramic Al2O3 99.9%
Electrical data / Signal connections
Number of wires 2
Electrical connection Connection cable, TPE-U, suitable for drinking water
Product environmental influences (protection class/temperature)
Protection class IP 68
Housing / Design / Mechanical data / Materials
Housing material primary Stainless steel
Sealing material EPDM
Customized versions
Customized versions Other pressure ranges Signal outputs Connection cable Show all Other seal material on request Other accuracies Separating diaphragms, others on request
Typical applications
Typ. applications Environmental engineering Groundwater monitoring Sewage treatment plants Show all Water treatment Bio-gas plants Tank batteries Rain spillway basin Fuel storage Drinking water production Filling level measurement in containers
Process connection
Process connection/installation Immersion probe