Magnetostrictive level sensor - LCM-O
Item number: LCM-O Price on request
Delivery time:Delivery time on request
Magnetostrictive continuous level transmitters base their operation onthe physical principle called Wiedemann effect and it allows continuousand precise measurement of liquid levels. The electronic unit sends apulse within a waveguide contained in the measuring rod; the magneticfloat intercepts the pulse generating an echo that is detected by thesame electronic unit.The elapsing time between the emission of the pulse and its recognitionis directly proportional to the position of the float, and then to the valueof the level to be measured.
Val.Co Srl
Via Rovereto 9/11
20014 S. Ilario di Nerviano MI, Genua
Italy
20014 S. Ilario di Nerviano MI, Genua
Italy
+39 0331 53 59 20
+39 0331 53 54 42
Attributes of Magnetostrictive level sensor - LCM-O
May differ from supplier data
Basic data
Pressure resistance, max. 20 bar
Accuracy (mm) 1 mm
Process pressure 20 bar
Medium temperature range/process temperature 105 °C
Measuring range (in bar) 20 bar
Air pressure measurement range 20 bar
Measurement range 2.9 m
Specific gravity 0.35
Additional measurement possibilities Temperature Pressure Voltage
Separating diaphragm/diaphragm material PTFE film
Adjustable Alarm and fill level are programmable
Measured medium Liquid
Measurement principle the Wiedemann effect
Probe type Magnetic float
Number of rods 1
Electrical data / Signal connections
Supply voltage 18 to 30 V
Electrical connection Cable M12 x 1, 8-pin
Voltage type (AC /DC) V DC
Product environmental influences (protection class/temperature)
Operating temperature range 0 to 50 °C
Protection class IP 67
Housing / Design / Mechanical data / Materials
Sensor length/installation length 1,300 mm
Housing material primary Aluminum
Masking material Plastic lid without viewing window
Sealing material Brass - Spansil
Material in contact with medium Aluminium Brass
Signal connection
Number of connection lines 8
Signal inputs/outputs and interfaces
Signal output 0.5…4.5 V 0…10 V 0…5 V Show all 4…20 mA 4-20mA/0-10V
Switching point adjustment via Programmable
Switching output PNP (2x)
Interfaces RS485
Process connection
Process connection/installation Thread
Type of installation Flange connection
Customized versions
Customized versions Anodized aluminum, with seal
Val.Co Srl
Via Rovereto 9/11
20014 S. Ilario di Nerviano MI, Genua
Italy
20014 S. Ilario di Nerviano MI, Genua
Italy
+39 0331 53 59 20
+39 0331 53 54 42