Manual spring test bench
Item number: Springtest T1 Price on request
Delivery time:Delivery time on request
The Spring Test T1 series is a very simple and inexpensive system for testing spring compressive strength with single-point measurement. The force gauge displays the applied force, the displacement sensor on the side measures the compression. The lever allows fast tests from 10 N up to 2 000 N. The manual test stand is portable, robust and space-saving. The parallelism of the lower plate can be adjusted for the correct adjustment of the spring position.
Attributes of Manual spring test bench
May differ from supplier data
Basic data
Load measurement range 100 to 2,000 N
Resolution, force 0.01 N
Resolution, displacement 0.01 mm
Travel, max. 150 mm
Accuracy (%) 0.1 %
Measured value memory Internal memory Peak value memory (peak-hold) Measurement value memory on the PC
Test bench type (manual/motorized) Manual (hand lever)
Additional measurement possibilities Compressive force
Computable sizes Maximum value Minimum value Statistical analyses
Housing / Design / Mechanical data / Materials
Dimension (width) 200 mm
Dimension (height) 200 mm
Signal inputs/outputs and interfaces
Interfaces RS-232
Signal output ±1V
Software interfaces / Driver software
Software support/drivers Data transfer software Acquisition software Evaluation software
Typical applications
Typical applications Spring check
Approvals / Certificates / Performance level / Integrity level
Approvals / certificates / supported standards COFRAC