Applications Heating/ Air conditioning/ VentilationMechanical engineering & Plant constructionPackaging industry

Price on request

The Pico pressure switch offers two independently adjustable electrical switching outputs for up to 250 mA each. In addition to the classic programming on site by push-buttons and the easy to read LED display, this transmitter qualified for industry 4.0 offers an IO-Link interface for central monitoring and diagnosis. Thus this pressure switch fits for Industry 4.0 and the future to come for its use in a modern sensor network.

Pico pressure switches are available for pressure ranges -1..0 bar / -1..1 bar / -1..10 bar / 0..10 bar and 0..12 bar with G1/8″ or NPT1/8″ thread as pressure connection. The supply voltage of 10..30 V is applied via an M8 or M12 connector. Two electrical switching outputs, each with a load capacity of 250 mA for direct control of valves, as well as the IO-Link output can be addressed via the two other contacts.

Variants
Pico pressure switches are available in 5 different pressure ranges with two different mechanical screw connections (G1/8″ or NPT1/8″ male thread).

Features

• Pressure indication and programming via 3-digit LED display
• Switching status displayed via LED
• Pressure ranges: -1..0 bar / -1..1 bar / -1..10 bar / 0..10 bar / 0..12 bar
• Pressure connection: G1/8″ or NPT1/8″ male thread
• Electrical connection: M8 or M12 screw connection
• Supply voltage: 10.8 V .. 30 V
• Power consumption: < 15 mA (< 3 mA in energy saving mode)
• Two PNP switching outputs, 250 mA each (optional NPN), short-circuit proof
• Switching outputs NO/NC programmable
• Switching frequency: max. 200 Hz
• High repeatability of ±0.2 % F.S.
• Measuring accuracy of ±2 % F.S.
• Switching modes: Hysteresis, Window comparator, Separate on/off delay, normally closed/normally open
• IO-Link, Version 1.1, Frame type 2.2
• Operating temperature: -10 .. 60 °C