APB2: Fujikura High Precision Analog Pressure Sensors with Non-Slip Port
2015-07-13 02:46:27, Angst+Pfister Sensors and Power AG The non-slip design improves the mechanical stability of the port/tube system, which is especially important when there is high pressure on the ports. Accordingly, Fujikura pressure sensors can be used at pressures of up to 12 bar.
Fujikura's new A series is compatible with the highly successful F and X series in terms of package dimensions and pin configuration, but offers higher overall accuracy (+/ 1.5%) and a wider compensated temperature range (0-85° C). The A-Series consists of two analog amplified sensor types, A2 and A3, and one digital sensor type, the A4. The A2 and A3 analog series are a two-chip system consisting of a sensor chip and a signal processing ASIC chip that provides digital-to-analog signal processing. The A2 series is designed for industrial applications in the range of 500 mbar to 12 bar, while the A3 series is designed for medical applications with a pressure strength of less than one bar.
The standard measuring range is 0 to 250 mbar as well as 0 to 10 bar; measuring ranges deviating from the standard are possible on request. The pressure gauge can be configured for positive, negative or bidirectional measurement and in terms of supply voltage a configuration with 3.0, 3.3 or 5.0 VDC is possible. The pressure sensors are supplied in the usual high-quality Fujikura packages, each with tray, tape, reel and stick according to customer specifications.
Fujikura's new A series is compatible with the highly successful F and X series in terms of package dimensions and pin configuration, but offers higher overall accuracy (+/ 1.5%) and a wider compensated temperature range (0-85° C). The A-Series consists of two analog amplified sensor types, A2 and A3, and one digital sensor type, the A4. The A2 and A3 analog series are a two-chip system consisting of a sensor chip and a signal processing ASIC chip that provides digital-to-analog signal processing. The A2 series is designed for industrial applications in the range of 500 mbar to 12 bar, while the A3 series is designed for medical applications with a pressure strength of less than one bar.
The standard measuring range is 0 to 250 mbar as well as 0 to 10 bar; measuring ranges deviating from the standard are possible on request. The pressure gauge can be configured for positive, negative or bidirectional measurement and in terms of supply voltage a configuration with 3.0, 3.3 or 5.0 VDC is possible. The pressure sensors are supplied in the usual high-quality Fujikura packages, each with tray, tape, reel and stick according to customer specifications.
Read more