A.S.T. specialises in the development and manufacture of electronic solutions for railway technology, industrial measurement technology and power electronics.

A.S.T.-Angewandte System Technik GmbH is a company that has been developing and manufacturing electronic solutions for more than 30 years. A.S.T.'s products are used in railway technology, industrial measurement technology and power electronics. equipment and geometric measurement equipment; intelligent energy management: including electric train warm-up equipment, preheating equipment and vehicle digitisation equipment for fuel savings and condition-based train maintenance; customer-specific frequency converters, inverters, charging technology and static converters: for railway and vehicle technology as well as industrial applications.

Force measurement systems
The EKM 305-F cross-travelling device moves the measuring and straightening frame laterally in the direction of travel. By means of an electric motor, the cross-travelling device is extended downwards, the measuring and straightening frame is lifted and can then be moved by hand (manually) to the other track. to the other track. It is characterised by an integrated steering device by which the position of the measuring and straightening frame can be corrected. During manual operation, the position of the measuring and straightening frame can be corrected relative to the track. At least two people are required to move the measuring and straightening frame at least two people are required because of its weight of approximately 4.2 tonnes. In addition, the traversing unit is equipped with a battery unit.

Product features
Designed for angular load measurement of car bodies for general assembly and maintenance processes, providing a low torsional position in accordance with DIN 25043-4
System consists of two rail-mounted trolleys, each with two precision-driven gearboxes and force sensors
Flexible alignment of force transducers in longitudinal and transverse directions
Measurement of angular load, centre of gravity and displacement (precision lifting device)
Basis for geometrical measurements according to DIN 25043, e.g. coal bed methane
Native operating software for process control, evaluation and archiving
Easy movement between tracks EKM 305-F
Motorised telescopic
Motor: Power supply 24VDC, power consumption 100W
Lifting gear: travel path approx. 100 mm, end-to-end travel time approx. 6 minutes, max. lifting height 50 mm, max. lifting load 5 tonnes
Battery: capacity 12Ah, approx. 5 lifting cycles
Weight: 475kg