Converter between analog signals and IO-Link

Conversion of analog signals to IO-Link
With the DP2200 and DP1222 converters, analog sensor signals 4...20 mA or 0...10 V can be converted to digital IO-Link communication. Vorteile: The digital process value transmission is insensitive to EMC influences. The converters also allow older analog sensors to be used in modern Industry 4.0 applications.

Converting IO-Link to analog signals
The DP1213 and DP1223 converters convert digital IO-Link measured values into two independent analog output signals, either 4...20 mA or 0...10V, depending on the variant. Analog signals are required, for example, as setpoints for proportional valves or for frequency converters to control motors.

* Conversion of analog signals to IO-Link or vice versa (depending on variant)
* Supports analog values as current or voltage signals (4...20 mA or 0...10 V)
* Industry 4.0 connection for conventional analog sensors

The performance plus thanks to IO-Link

* Simple parameterization via IO-Link
* Reduction of interference due to digital transmission