Ideal for limited space conditions:
2019-09-30 04:06:23, Angst+Pfister Sensors and Power AG The CP-1HX is a new contactless angle sensor with a housing height of just 4.4 mm, specifically designed for limited space conditions.
It is particularly well suited for humanoid robots, personal mobility devices, for measuring hip joint angle in exoskeletons.
As a special variant, a non-contact version with a separate solenoid unit is available on request, with which the flap angle of a valve can be measured in a flow meter.
The integrated shaft with a diameter of 6.0 mm is available in two versions: as D-Cut shaft or with double-sided flat profile.
The angular range can be selected from 50° up to 360° with single or dual output, this with an excellent absolute linearity of +/-2%. The electrical output signal is either 5V ratiometric or PWM with high immunity to electrostatic discharge (ESD) and electromagnetic interference (EMI).
Technical specifications:
Narrow Hall-effect angle sensor
Projected housing height 4.4 mm
Angle range 50° to 360°
Output 5V ratiometric or PWM
Absolute linearity of ±2% FS
Ø 6.0-mm shaft with D-Cut or double-sided flat profile
Separate non-contact solenoid unit available on request
High ESD and EMI protection
It is particularly well suited for humanoid robots, personal mobility devices, for measuring hip joint angle in exoskeletons.
As a special variant, a non-contact version with a separate solenoid unit is available on request, with which the flap angle of a valve can be measured in a flow meter.
The integrated shaft with a diameter of 6.0 mm is available in two versions: as D-Cut shaft or with double-sided flat profile.
The angular range can be selected from 50° up to 360° with single or dual output, this with an excellent absolute linearity of +/-2%. The electrical output signal is either 5V ratiometric or PWM with high immunity to electrostatic discharge (ESD) and electromagnetic interference (EMI).
Technical specifications:
Narrow Hall-effect angle sensor
Projected housing height 4.4 mm
Angle range 50° to 360°
Output 5V ratiometric or PWM
Absolute linearity of ±2% FS
Ø 6.0-mm shaft with D-Cut or double-sided flat profile
Separate non-contact solenoid unit available on request
High ESD and EMI protection
Read more