The B+B Rain Detector - A Quality Product Gets a Re-Design

Now the classic has received a redesign and thus impresses with optimized electronics.

The sensor surface has been optimized to increase reliability in difficult operating conditions (e.g. driving rain). To ensure this, the tips of the sensor surface now no longer run vertically downwards, but at an 80° angle. In addition, the individual areas of the sensor surface are now significantly narrower and thus detect rain and snow more reliably. In addition to the optimized sensor surface, automatic activation of the sensor heating has also been integrated. This is only active when the sensor surface is wet and is used to quickly dry the sensor surface and remove any residual snow. In addition, there is now an adjustable switch-off delay in the rain detector. This can be set individually to approx. 90 to 330 seconds, depending on requirements.

Basically, the rain detector is used to control terminal devices in building automation. The rain detector can be used, for example, to automatically control the operation of awnings or skylights. The switching polarity, as well as the sensitivity are adjustable. In the most sensitive setting, the device is also suitable for detecting fog. The mast or wall mount available as an accessory allows for easy installation.

Features:

• Functionally safe, electrolytic measuring principle
• Detects precipitation as rain or snow
• Large, heated sensor surface for faster drying and for winter operation <./li>
• Sensitivity and switching behavior adjustable
• Universal wall/mast mount available as accessory

Application areas:

• Agriculture and nurseries
• Control of ventilation hatches and skylights
• .Automatic switches for awnings and roller blinds
• Building control systems
• Weather stations

Rain detector 12V, Art.-No. REGME12 V, rain detector 24V, art. no. REGME 24 V, wall bracket,art. no. REGME-WAHA