KIMESSA: The leader in gas monitoring and alarm systems
2023-06-20 00:00:41, Kimessa AGKIMESSA specializes in stationary gas detection and control systems. all KIMESSA products are developed and manufactured in Switzerland, have ISO 9001:2008 certification and all products for use in Ex zones are manufactured in accordance with the high quality requirements of Directive 94/9/EC (ATEX). gas monitoring products are exported worldwide and are provided by professionally trained The partner companies provide professional services.
Products
I. Gas alarm center
1、Channel gas warning center CANline04
Features
The CANline04 control panel is used to display the measured gas concentration and to control the connected devices. Up to four analog or digital gas sensors can be connected
Each sensor can be freely programmed with up to 4 different limit values and individually assigned one or more of the 5 built-in relays
Different measuring ranges programmable
Different relay functions programmable (reset hold or reset, NC or off, maximum activity time, etc.)
Control panel can be mounted in the control cabinet or directly on the wall (optional DIN rail housing)
Programming via keystrokes without PC (code-protected) or via configuration software (Windows)
Integrated modem bus RTU interface
Models available with LED flash light installed
Continuous recording of measurement data on memory card
2. Channel gas monitor CANline32+
The CANline32+ control panel is used to display the measured gas concentration and to control the connected devices. Up to four analog gas sensors can be connected; 32 gas probes and 32 relay contacts can be connected to the CANline32 control panel, for a total of 128 gas sensors.
Features
96 (3 x 32) additional gas sensors and relay contacts can be connected via up to 3 CANline bus expanders Each probe can be freely programmed with up to 4 different limit values and individually assigned to the measuring range of one or more of the 8 built-in relays
Different relay functions programmable (reset hold or reset, NC or off, maximum activity time, etc.)
Control panel can be mounted in the control cabinet or directly on the wall (optional DIN rail housing)
Programming using configuration software (Windows)
History function: alarms and faults can be read on the menu display
Integrated modem bus RTU interface
Version with LED flashing light available
Continuous recording of measurement data on memory card
II. Gas detectors
Measurable gases
CH₄, H₂S, O₂, F₂, NO₂, etc.
Measuring principle
Electrochemical, heating, infrared signal
Features
Up to 128 gas sensors and alarm components can be connected
Linear and temperature compensated digital CAN line bus output signal
16-30 VDC supply voltage (4-wire system)
All potentiometer and measuring instrument connections for calibration are externally accessible without opening the probe
Water and dust resistant housing (protection class IP65)
Housing made of stainless steel and acid-resistant steel
Explosion protection class: Ex dc nA IIC T4 Gc
Application scenarios
KIMESSA products are widely used in underground parking lots, laboratories, heating, refrigeration systems, oil refineries, hazardous materials storage, refrigerators, sewage treatment plants, swimming pools, hospitals, pharmaceutical industry, drinking water, animal husbandry, wine cellars, automotive industry, storage tanks, beverages, steel industry, food industry, textile industry, factory construction, power plants, welding, nitrogen tanks, beer equipment and other fields.
1、KIMESSA gas alarm system for underground parking lot
CO/NO₂ monitoring in underground parking lots. Typical gases produced in underground parking lots are CO, NO₂, NO, gasoline vapor CO/NO₂ measuring system and control system are basic equipment for underground parking lots and bus shelters. Energy saving, safety and air hygiene are the needs of everyone today. The new generation of multifunctional CANline control units is a cost effective solution for small and large systems. Precise and selective measurement is a prerequisite for optimal results.
Individual ventilation concepts are realized using various control programs. The integrated on and off delay prevents premature opening of the ventilation in case of short-term localized increases in CO (gasoline vehicles) and NO₂ (diesel vehicles) concentrations. the CO/NO₂ measurement is as good as its measuring principle. the KIMESSA CO/NO₂ gas sensor is equipped with a selective electrochemical measuring element. This ensures effective and optimal ventilation while maintaining the required safety and preventing false exhaust alarms.
For visualization and quick control of the gas monitoring data, a touch screen display or a web server can be used. Of course, all data is recorded and can be viewed locally on the touch monitor or via a web browser on each PC. Exhaust gas alarms can increase the CO/NO₂ concentration in a room uncontrollably due to intensive traffic movements or technical failures and trigger the danger of poisoning. The exhaust gas warning light alerts those in danger in time. The warning lights are very easy to install and fit perfectly into the room even in complex buildings.
Upon request, the entire alarm can be supplied with emergency power, including lights and horn. Since KIMESSA does not use battery backup, subsequent problems and costs in case of battery failure or similar are reduced. kimessa can integrate a UPS into the control panel without the need for a separate housing.
KIMESSA's sensors are made of welded stainless steel and are very stable. Like other manufacturers, KIMESSA has been using bus technology in underground parking lots for many years. Not only that, but KIMESSA also integrates a complete alarm system into the bus. For example, LED warning lights and horns can be integrated into the bus, thus saving a lot of cables.
2、KIMESSA gas alarm system in the laboratory
The innovative laboratory safety solution 120 gas monitoring of many different substances. Depending on the field of activity in the laboratory, there are many different types of gases that are harmful to humans or pose a potential accident risk as explosive or flammable substances.KIMESSA offers you a comprehensive safety solution for gas monitoring.
Laboratory KIMESSA solutions for monitoring the various gases occurring in the laboratory. Use: CH₄, H₂S, O₂, F₂, NO₂, etc. For the safety of humans and the environment. Laboratories are typically characterized by a wide range of different gases with low measurement ranges, such as: bromine, formaldehyde, hydrogen peroxide, and arsenic-hydrogen. KIMESSA is one of the leading suppliers when it comes to measuring ranges and gas types.
For visualization and quick control of the gas monitoring data, a touch display can be installed at the laboratory entrance. Of course, all measurement data and events are recorded and can therefore be tracked and analyzed at any time.
Using the plug-and-play web server CWS 101 "EasyLog", gas concentrations can be visualized in real time in the computer network and e-mails can be sent to relevant employees in case of events such as alarms or malfunctions. Special solutions include mountable control panels for gas cylinder cabinets and flush-mounted gas sensors. In case of danger, solenoid valves and other switching points are immediately shut down by the control center.
For laboratories, KIMESSA offers a variety of customized solutions. Of particular note is the unique bus concept, in which monitoring, alarming and visualization using gas sensors can be easily connected to the same cable. As a result, installation costs can be optimized and the system can be easily expanded at any time without great effort. This innovative solution is only available from KIMESSA.
3D simulator for designing gas alarm systems Using the KIMESSA 3D simulator, it is easy to explain the installation of gas alarm systems in the laboratory. Issues such as the optics and the position of the current alarm as well as the correct position of the sensor are explained in an interesting way.
Read more